23
22
GB
Duomat Evolution DeLuxe
Measures the temperature electronically and controls bed
and water heating in aquaria automatically
- Be sure to read the instructions for use carefully and in their entirety before using this device.
Keep the instructions in a safe place. -
Safety instructions
• For 230 V AC / 50 Hz only.
• Only to be used in rooms subject to normal levels of dirt.
• The mains plug must be accessible at all times after installing the device.
• Ensure good cooling at all times, do not cover the device.
• All cables leading out of the aquarium and the mains leads of the employed devices must be provided with a drip
loop to prevent any water which may run down the cables from reaching items of equipment or the mains socket
outlet.
• Switch off all devices in the aquarium before carrying out maintenance work.
• Should the device's connecting lead be damaged, it is to be replaced by the manufacturer or the latter's after-sales
service personnel only, in order to avoid any dangers
• Always disconnect all devices located in the water from the power supply before placing your hands in the aquarium water.
• Note maximum output load for the unit's sockets (bed heating: 400 W, water heating: 800 W).
Congratulations on buying this high-quality dual aquarium thermostat from DENNERLE. You have chosen a state-of-the-art aquarium
device for the very highest professional requirements. If used properly and treated with due care, this unit will provide a simple,
convenient and precise means of automatically controlling your bed heating (DENNERLE Bodenfluter cable) and water heating as the
essential basis for fantastic plant growth and healthy fish. DENNERLE wishes you lasting enjoyment from your aquarium!
1 Overview of the Duomat
Mains lead
Power unit
Temperature sensor
Fuse - bed heating socket
Socket for bed heating
Socket for water heating
Fuse - water heating socket
Socket for display connecting lead
Mounting plate
Display
Front flap
2 Overview of functions
No.
Key / component
Functions / mode of operation
1
Temperature
display
Indicates the current water temperature in the aquarium.
Flashes when the measured value differs from the set value
by more than +/– 3 °C (alarm function)
2
°C
To set the desired temperature:
Press key, set desired temperature with "+" and "–"
3
+
Increase setting
4
–
Reduce setting
5
Indicator lamp
Bed heating
LED ON = bed heating ON
6
Indicator lamp
Water heating
LED ON = water heating ON
7
Summer mode
Press key = Summer mode ON
Press key again = Summer mode OFF
8
Night-time
temperature
reduction
To switch on night-time temperature reduction: Press key, then
(1) enter the desired night-time reduction in temperature (max. 3 °C) with "+"
and "–", then (2) enter the desired starting time for night-time temperature
reduction with "+" and "–". To switch off night-time temperature reduction:
Press key, then use "–" to set night-time temperature reduction to "0".
9
Time
Press key = current time appears on display
To set the time: Press "+" or "–" key
10
Acoustic alarm
Press key to activate the acoustic alarm (in addition to the visual alarm,
see 1) Press key again to switch off the acoustic alarm
11
Dimmer
Press key and adjust the brightness of the display to the ambient light
conditions with "+" and "–"
12
Indicator lamp
for keypad lock
The keypad lock prevents unintentional alteration of the settings (child-proof
safety lock): Press "Dimmer" and "°C" simultaneously to activate the keypad
lock Press key combination once again to deactivate the keypad lock
DENNERLE
Duomat Evolution DeLuxe