Confidential
and
Proprietary
Information
●
DenMat
Holdings,
LLC
●
1017
W.
Central
Ave.,
Lompoc,
CA
93436
‐
2701
●
1
‐
800
‐
433
‐
6628
●
Page
10
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
"
Les changements ou
modifications
non
expressément
approuvés
par
la
partie
responsable
de
la
conformité
pourraient
annuler
l'autorité
de
l'utilisateur
à
utiliser
cet
équipement
."
c. Per Industry Canada RSS rules:
This device complies with Health Canada’s Safety Code. The installer of this device
should ensure that RF radiation is not emitted in excess of the Health Canada’s
requirement. Information can be obtained at
http://www.hc-sc.gc.ca/ewh-
sem/pubs/radiation/radio_guide-lignes_direct-eng.php
Cet appareil est conforme avec Santé Canada Code de sécurité 6. Le programme
d’installation de cet appareil doit s’assurer que les rayonnements RF n’est pas émis au-
delà de I’exigence de Santé Canada. Les informations peuvent être obtenues:
http://www.hc-sc.gc.ca/ewhsemt/pubs/radiation/radio_ guide-lignes_direct-eng.php
V. INSTALLATION
NOTES
Follow these general installation guidelines when integrating the Module into the final
product:
1.
For best transmission distance, do not shield the antenna side of the Module with
electrically conductive or magnetic materials.
2.
The Module can be powered with a DC power supply as described in previous
sections. Alternatively, it can be powered using 3 primary cells of Alkaline or Lithium
type, each being of the nominal 1.5V.
3.
Certification will be void if any circuitry on this Module is modified or tampered with.
Contact DenMat Holdings, LLC for all such information or for any other questions
regarding safe and legal installation of this device.
4.
The product housing should be designed in such a way as to not allow liquid spillage
on this Module.
5.
Components on this assembly are static sensitive. Handle using proper Electrostatic
Discharge (ESD) protective equipment.
VI.
MAINTENANCE AND CARE
No periodic maintenance is required for this module.
