Denios HazMat station EPO-2, Operation Manual And Spare Parts List, Page: 5 / 6

Issue: 09/2012
Automatic hose reel open - serie 506
www.denios.com 3
EC Declaration of Conformity
SAMOA INDUSTRIAL, S.A., Alto de Pumarín, s/n, 33211 - Gijón - Spain, declares declares that the hose reels
506 XXX conform(s) with the EU Directive(s): (2006/42/EEC)
For SAMOA INDUSTRIAL, S.A.
Pedro E. Prallong Alvarez
Production Director
Hose does not rewind Spring is not tensioned enough Increase spring tension
Leaking hose reel Hose has a hole or ís damaged Replace the hose
Leaking swivel Damaged swivel rings Replace the swivel rings
Hose does not extend out as much
as required
Spring is over tensioned Decrease spring tension
Hose reel does not latch Damaged ratchet Replace the ratchet
Ratcet not fitted Assemble the ratchet properly
Damaged spring ratchet Change the ratchet spring
Symptom Possible causes Solution
Troubleshooting
Swivel replacement
WARNING: Before removing the old swivel, dose the nearest shut off valve to the reel and open the
fluid control gun to release the pressure inside the hose.
 Pull the hose out and let the hose get latched (Fig. 15).
 Unscrew the nuts with two spanners (Fig. 16).
 Remove the circlip and pull the swivel. Be careful not to damage the swivel O-Ring (Fig. 17).
 Assemble the new swivel and re-assemble the pieces in reverse order.
Ratchet replacement
 Remove the nut that fixes the latch (Fig. 18).
 Replace the latch and/or the latch spring.
 Re-assemble the pieces in reverse order.
15 16 17
18