Pag
e
6
www.D
EN
A
LI
p
lu
s.
co
m
Step #1 - Unpacking the Cooktop
Carefully unpack the cooktop from its shipping container. If possible, retain the original shipping carton and
protective packaging in the event the unit ever has to be returned for service. Verify and identify the
package contents. The following items should be included in the carton. If any components are missing or
damaged, call customer service immediately.
Radiant Electric Cooktop
Mounting brackets (2 pcs. for Single and Double Burners, 4 pcs. for Triple Burners)
Mounting screws (2 pcs. for Single and Double Burners, 4 pcs. for Triple Burners)
Fig. 1
Step #2 - Check the Electrical Supply Requirements
This product must be installed in accordance with national, state and local electric codes. The following
table provides the correct voltage, amperage and frequency that must be supplied to the cooktop.
Model #
Maximum Connected
Load (Watts)
Power Supply
Requirements
Minimum Wire
Size (AWG)
CTR1120 _ _ _
1,200
120V/ 10A/ 60Hz
16 Ga.
CTR2120 _ _ _
2,400
120V/ 20A/ 60Hz
16 Ga.
CTR2240 _ _ _
2,400
240V/ 10A/ 60Hz
16 Ga.
CTR3240 _ _ _
3,600
240V/ 15A/ 60Hz
16 Ga.
The supply must be from an individual grounded circuit that is protected by a circuit breaker and rated per the
specifications for the various models as shown in the table above.
INSTALLATIONS MUST COMPLY WITH ALL LOCAL, STATE
AND NATIONAL ELECTRICAL CODES.
Failure to comply with the applicable codes may result in fire, property damage,
personal injury or death.
If the electric power supply does not meet the product specifications, consult
with a licensed electrician before proceeding with installation.
