Your monitor comes with the HMI (Human
Machine Interface and all cables ready to be
installed. You will also need to check your
settings once you have installed the unit
Tools you will need-
YOUR DENAGO Multi Tool- 3mm Allen key
Please let us know if you have any comments and/or follow up questions!
[email protected] or 1-877-755-2453(BIKE)
MONITOR-
INSTALLATION
The following instructions will outline how to remove, replace
and adjust your settings on your Denago City 1.0 eBike
INSTALLATION STEP 1 MONITOR
Take monitor and place brackets on
either side of the stem. Using the
3mm Allen Key tighten and secure
both bolts
You are almost done. Let's check your settings now
INSTALLATION STEP 2 HMI
Place HMI unit on left side of
handlebar- NOTE the BACK
BRACKET has a cut out for the cable
this goes on the bottom. Connect
HMI and Bracket with 2 bolts.
Using 3mm Allen key
IF YOU LOOSEND the brake lever
please tighten and secure for safety
INSTALLATION STEP 3 CABLE
CONNECTION
Take the cable with the GREEN
internals and connect to the open
cable with matching colors. Align
the notch and press together.
