DENAFRIPS PONTUS II, Owner'S Manual

Page: 10 / 18

© DENAFRIPS CO. LTD. & VINSHINE AUDIO PTE. LTD. (SINGAPORE)
ALL RIGHTS RESERVED
Parameter Settings:
(1) Filter Selection (Effective in OS Only)
1. Press the Mute button once to enter configuration mode
2. Press the Mode momentarily

OPT On = Slow Filter

OPT Off = Sharp Filter
3. Wait for 10s
4. DAC back in operational mode
(2) Dual AES/EBU Input
1.
Press the Mute button once to enter configuration mode
2. Press the INPUT+ momentarily, CO1, CO2 LED will turn on/off

CO1 On = Dual AES/EBU Input Enabled
 CO2 Off = Dual AES/EBU Input Disabled
3. Wait for 10s
4. DAC back in operational mode
(3) I²S Pinout Configuration
1.
Select I²S-A Input
2. Press the Mute button once to enter configuration mode
3. Press the Phase button momentarily, 1X 2X 4X will turn on/off in a fixed pattern to
denote binary 000-111

PSAUDIO I²S Standard = 1X On, 2X 4X Off = 100
4. Wait for 10s
5. DAC back in operational mode
Video Guide:
https://www.denafrips.com/config-pontus