Additionally, the signal driver
has two banks of internal DIP
switches that you can use to
select the clipping diodes. The
switches are as follows:
1. 1N4148 silicon diode
2. 1N4148 silicon diode
3. 2N7002 MOSFET
4. Red LED
5. 1N3666 germanium diode
6. 1N6263 Schottky diode
7. Open/close clipping loop.
In order to function, at least
one switch on each bank must
be in the “OFF”(down) posi-
tion. The following pages have
some suggested settings.
