Demco PHOENIX ML44, Instruction Manual

Page: 5 / 26

When using electrical appliances, basic
precautions should always be taken to re-
duce the risk of electrical shock and injury
to persons, including the following:
1. Read all instructions before connecting
or operating this unit.
2. Retain this Owners Manual for future
reference. For technical assistance
beyond what is covered in this manual
contact Technical Service.
3. Save your carton! PHOENIX laminators
are shipped in special cartons and should
be used in case your PHOENIX laminator
should ever require service or need to be
transported.
NOTICE! Failure to return machines
properly packed in original packaging
will impose a fifteen percent
restocking fee plus costs to repair
shipping damage. Contact Technical
Service for a return authorization
(see
WARRANTY AND AUTHORIZED
REPAIR CENTERS).
4. Do not use the laminator for other
than its intended use.
5. The Laminator case may be cleaned
with a lint-free cloth, lightly
dampened with a mild soap and
water solution. Do not use spray-on
cleaners.
NOTE: Disconnect the laminator from
the
main power supply before
cleaning!
6. Do not immerse any part of the
laminator in water or other liquids..
7. The laminator's location or position should
not interfere with its proper ventilation. Do
not install or place in a built-in enclosure
such as a bookcase.
8. Do not operate the laminator with a
damaged cord or plug, or after the laminator
has been dropped or damaged in any
manner. If purchased in U.S./Canada,
return the laminator to your ADEMCO reseller for
examination, repair or adjustment.
8. Do not let the cord hang over the edge of a
counter/bench or touch hot surfaces.
9. Always unplug the laminator when it is not
in use for a long period.
10. This unit should only be connected to a
power supply outlet of the voltage,
amperage, and frequency marked on the
rear panel. The laminator has a grounded
plug (three prongs). To reduce the risk of
electrical shock, this plug is intended to fit
only a grounded outlet of the proper
amperage, and in only one way.
If the plug does not fit in the outlet, contact
a qualified electrician.
WARNING! Do not modify the plug in
any way.
S
AFETY
I
NFORMATION
PHOENIX
44 LAMINATOR
4