Demco Kar Kaddy X, Operator'S Manual

Page: 19 / 28

RD20026 Page 19
2
4
1
5
3
1
Wiring Parts List
Testing Circuitry
Wiring Breakdown
1. With headlights in “ON” position, the taillight should be lighted.
2. Start engine and have someone depress brake pedal. Brake lights of the tow dolly and towing vehicle should come
“on” and “off” simultaneously with each application.
3. Put left turn signal on. Left turnlight of tow dolly and towing vehicle should flash simultaneously. Should the turn
signal light of the tow dolly function opposite to those of the towing vehicle, it is probable that the YELLOW and
GREEN wires have been reversed. Check the plug connection under the tongue of the tow dolly to make sure wire
colors are not crossed at that point. If plug connection is correct, correct problem by reversing yellow and green
wire connection on the towing vehicle.
4. CAUTION: Many flashers for vehicle turn signals will not carry the additional load of tow dolly turn signals. If nor-
mal operation does not occur when connected to the tow dolly, a heavy duty replacement flasher may be obtained
through auto parts outlets.
WHITE Ground
BROWN Tail Lights and License Plate Light
YELLOW Left Turn and Stop
GREEN Right Turn and Stop
COLOR CODE FOR WIRING HARNESS
ITEM # PART # DESCRIPTION Qty
1 01863 GROMMET .625 OD X .375 ID X .25 THK 3
2 02196 BOLT .313NC X .75 HEX HD SELF TAPPING 8
3 11590 WIRE HARNESS, TONGUE 1
4 15921 REAR WIRING ASSEMBLY 1
5 16677 CLAMP WIRE .375 GALV W/ VINYL 8
Please order replacement parts by PART NO. & DESCRIPTION.