Page 8
SAFETY SIGN CARE
•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have become illegible.
•
Replacement parts that displayed a safety sign should also display safety sign.
•
Safety signs are available from your distributor, dealer parts department, or factory.
How to install safety signs:
•
Be sure that installation area is clean and dry.
•
Decide on exact position before you remove backing paper.
•
Remove smallest portion of split backing paper.
•
Align decal over specified area and carefully press small portion with exposed sticky
backing in place.
•
Slowly peel back remaining paper and carefully smooth remaining portion of decal into
place.
•
Small air pockets can be pierced with a pin and smoothed out using piece of decal
backing paper.
REMEMBER
Your best assurance against accidents is a careful and responsible operator. If there is any
portion of this manual or function you do not understand, contact your local authorized dealer
or manufacturer.
