DEMAG DRC-10, Operating Instructions Manual

Page: 13 / 48

13
21492044.indd/131
107
3.2.1 Downwards compatibility of
DRC-10 D2 transmitters
For combining DRC-10 D2 transmitters with D1 type receivers
DRC-DR, part no. 719 441 45
DRC-MP, part no. 773 432 44
these transmitters must be programmed for operation at a fixed frequency (chapter
„Programming parameters of the DRC-10 handheld transmitter“, section 1.6).
The table below shows an overview of the possible combinations.
3.2.2 Compatibility
D1, D1 FH and D2
Type
Product
Part no.:
Receiver
D1
DRC-MP
773 432 44 D1
DRC-DR
719 441 45 D1 FH
DRC-Mp
773 584 44 D1 FH
DRC-DR
719 436 45 D2
DRC-DR
719 439 45
Transmitter
D1
DRC-10
773 431 44
OK OK
not
compatible
not
compatible
not
compatible
D1
DRC-J
773 460 44
OK OK
not
compatible
not
compatible
not
compatible
D1 FH
DRC-10
773 581 44 Fixed
frequency
Fixed
frequency
OK OK OK
D1 FH
DRC-J
773 583 44 Fixed
frequency
Fixed
frequency
OK OK OK
D2
DRC-10
773 591 44 Fixed
frequency
Fixed
frequency
OK OK OK
Explanation:
D1 without frequency hopping
D1 FH with frequency hopping
D2
with frequency hopping and, if required, with extended functions
Transmitters and receiver with frequency hopping can be identified by the part no.
on the rating plate.
Additionally transmitters with frequency hopping have a different symbol for the
signal strength in the display.
3.2.3 Frequency hopping feature
Transmitter without frequency hopping Transmitter with frequency hopping
42747544.eps
???
???
STOP
STOP