DEMAG DC-Com 1, Operating Instructions Manual

Page: 71 / 116

8.5.3 Removing the chain collector box
Fig. 38
– Unscrew and remove service cover (1).
– Place bag (2) with the control cable on the top of the chain hoist.
– Disconnect spring (3) and place it in the recess in the chain collector box.
– Remove retaining spring (4) from pin (5) and remove the pin. While doing so, hold the chain collector.
– Place chain collector box (6) on the ground.
8.5.4 Operating limit switches (standard for DC-Com 10 with 2/1 reeving)
8.5.4.1 Checking operating limit switches
DANGER
Danger of broken chain and falling load
The chain may break and loads may fall if the emergency limit position limiter is frequently approached.
214
80
2 44/291
113
71