background image

 

DEMA® MODEL 693T FOAM STATION II 

INSTALLATION INSTRUCTION 

I-747 

 

 

Page 5 of 8 

Rev. E-40261 

 

 

11/13/14 

 
 

Return Policy 

No merchandise may be returned for credit without DEMA Engineering Company’s written permission.  Return Merchandise 
Authorization (RMA) number required in advance of return. 
 

Warranty 

DEMA products are warranted against defective material and workmanship under normal use and service for one year from the date 
of manufacture.  This limited warranty does not apply to any products which have a normal life shorter than one year or failure and 
damage caused by chemicals, corrosion, improper voltage supply, physical abuse or misapplication.  Rubber and synthetic rubber 
parts such as “O”-rings, diaphragms, squeeze tubing and gaskets are considered expendable and are not covered under warranty.  This 
warranty is extended only to the original buyer of DEMA products.  If products are altered or repaired without prior approval of 
DEMA, this warranty will be void. 

Defective units or parts should be returned to the factory with transportation prepaid.  If inspection shows them to be defective, they 
will be repaired or replaced without charge.  F.O.B. factory DEMA assumes no liability for damages.  Return merchandise 
authorization number to return units for repair or replacement must be granted in advance of return.

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 693T FOAM STATION II









Reviews: