DEMA 651AG SINGLE-FEED
INSTALLATION INSTRUCTIONS
I-715
Pg. 2 of 5
Rev. F- 42173 10/04/16
III. OPERATION:
The model 651AG is activated by turning the on-off ball valve fully counter-clockwise. When the desired amount of chemical
water solution has been obtained turn the ball valve fully clockwise.
Note: Do not use ball valve to throttle chemical water
flow rate; this will result in inconsistent induction rates.
TABLE 1
164BAG (1 GPM FLOW RATE PROPORTIONER - 1/4" BARB AND TUBING)
Metering Tip Color
Injection Rates For Viscosities Shown
1 cps
75 cps
200 cps
Oz/Gal Ratio Oz/Gal Ratio Oz/Gal Ratio
Tan
1.25 102-1 0.90 142-1 0.60 213-1
Orange 1.70
75-1
1.20
107-1
0.80
160-1
Turquoise
2.15 60-1 1.55 83-1 1.10 116-1
Pink
3.00 43-1 2.00 64-1 1.50 85-1
Light
Blue*
3.90 33-1 2.75 47-1 1.80 71-1
Brown
4.55 28-1 3.00 43-1 2.00 64-1
Red
5.80 22-1 3.60 36-1 2.30 56-1
White
7.00 18-1 4.45 29-1 2.70 47-1
Green
7.90 16-1 5.00 26-1 3.00 43-1
Blue
9.80 13-1 5.75 22-1 3.30 39-1
Yellow
14.80 9-1 7.35 17-1 3.55 36-1
Black
20.15 6-1 8.50 15-1 3.70 35-1
Purple
27.80 5-1 9.80 13-1 3.80 34-1
Gray
31.60 4-1 10.50 12-1 3.90 33-1
No Tip
35.70
3.6-1
11.80
11-1
4.50
28-1
*Metering tip color was formerly clear.
Note: Special tips and proportioners are available to achieve higher and lower dilutions.
All dilutions were based on 1 GPM flow at 40 psi of water pressure.
TABLE 2
(163BAG - 4 GPM FLOW RATE PROPORTIONER, 1/4" BARB AND TUBING
)
Metering Tip Color
Injection Rates For Viscosities Shown
1 cps
75 cps
200 cps
Oz./Gal. Ratio Oz./Gal. Ratio Oz./Gal. Ratio
Tan
0.30 427-1 0.20 640-1 0.15 853-1
Orange
0.40 320-1 0.30 427-1 0.25 512-1
Turquoise
0.50 256-1 0.40 320-1 0.30 427-1
Pink
0.75 170-1 0.50 256-1 0.40 320-1
Light
Blue*
1.00 128-1 0.70 183-1 0.45 284-1
Brown
1.12 114-1 0.80 160-1 0.50 256-1
Red
1.50 85-1 0.90 142-1 0.60 213-1
White
1.75 73-1 1.10 116-1 0.70 183-1
Green
2.00 64-1 1.25 102-1 0.80 160-1
Blue
2.50 51-1 1.50 85-1 0.85 151-1
Yellow
3.75 34-1 1.85 69-1 0.90 142-1
Black
5.00 26-1 2.00 64-1 0.95 135-1
Purple
8.50 15-1 2.50 51-1 0.98 131-1
Gray
11.50 11-1 2.70 47-1 1.00 128-1
None
16.25 8-1 3.00 43-1 1.20 107-1
*Metering tip color was formerly clear.
Note: Special tips and proportioners are available to achieve higher and lower dilutions.
All dilutions were based on 4 GPM flow at 40 psi of water pressure.
Leaner dilutions can be achieved by ordering DEMA ultra lean metering tip kit, part no. 100-15KU or capillary 44-61P.
