I-145
Pg. 2 of 3
Rev. A0600
Table 4
Induction Rates for Viscosities Shown
1 cps
75 cps
200 cps
500 cps
Metering Tip
Color
Oz/Gal
Ratio
Oz/Gal
Ratio
Oz/Gal
Ratio
Oz/Gal
Ratio
Clear
0.84
152-1
0.65
197-1
0.45
284-1
0.30
427-1
Purple
1.35
95-1
1.10
116-1
0.90
142-1
0.60
213-1
Yellow
2.40
53-1
2.00
64-1
1.50
85-1
1.10
116-1
Green
4.20
30-1
3.40
38-1
2.65
48-1
2.10
61-1
Pink
5.25
24-1
4.50
28-1
3.45
37-1
2.60
49-1
Turquoise
9.40
14-1
7.25
18-1
5.45
23-1
3.70
35-1
Black
11.75
11-1
8.80
15-1
6.35
20-1
4.20
30-1
Gray
14.50
9-1
10.80
12-1
7.75
17-1
4.75
27-1
Red
18.00
7-1
13.20
10-1
8.30
15-1
5.00
26-1
Blue
20.60
6-1
14.70
9-1
8.65
14.8-1
5.20
25-1
Brown
24.10
5-1
16.15
8-1
9.30
14-1
5.50
23-1
White
27.50
4.7-1
17.80
7-1
9.70
13-1
5.70
22-1
Orange
30.00
4.3-1
18.50
6.9-1
10.10
12.7-1
5.85
21.9-1
Lt. Blue
32.00
4-1
18.90
6.8-1
10.20
12.5-1
6.00
21-1
Tan
32.50
3.9-1
19.25
6.6-1
10.40
12.3-1
6.25
20.5-1
None
34.25
3.7-1
20.45
6-1
10.60
12-1
6.50
20-1
All induction rates are based on 40 psi water pressure and 40 psi air pressure.
RETURNS:
NO MERCHANDISE MAY BE RETURNED FOR CREDIT WITHOUT DEMA’S WRITTEN PERMISSION.
RETURN MERCHANDISE AUTHORIZATION NUMBER REQUIRED IN ADVANCE OF RETURN.
WARRANTY:
DEMA products are warranted against defective material and workmanship under normal use and service for one year from the
date of manufacture. This limited warranty does not apply to any products which have a normal life shorter than one year or
failure and damage caused by chemicals, corrosion, improper voltage supply, physical abuse, or misapplication. Rubber and
synthetic rubber parts such as “o”- rings, diaphragms, squeeze tubing and gaskets are considered expendable and are not covered
under warranty. This warranty is extended only to the original buyer of DEMA products. If products are altered or repaired
without prior approval of DEMA, this warranty will be void.
Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows them to be defective,
they will be repaired or replaced without charge, F.O.B. factory. DEMA assumes no liability for damages. Return merchandise
authorization number, to return units for repair or replacement, must be granted in advance of return.
