manualshive.com logo in svg

DeLUX DP, Operation Manual

Share
Download
DeLUX DP Operation Manual Download Page 213

SERIES 71, 72, AND 76 MODUTROL IV™ MOTORS

63-2640—08

6

3.

Attach the motor to the bracket with the four bolts 

provided. See Fig. 4.

Fig. 3. Mounting the motor with an adapter bracket.

Damper Linkages

The motor does not include a crank arm. Order the crank arm 

separately (see Accessories in the Specifications section). For 

detailed instructions on the assembly of specific linkages, refer 

to the Installation Instructions packed with the linkage.

CAUTION

Equipment Damage Hazard.

Stalling a motor can damage the drive shaft.

Ensure installation of motors and linkages allows the 

motor to drive through full stroke without obstruction.

Valve Linkages

The Q100 Linkage requires a 220738A Adapter Bracket for all 

valve applications. Applications with the Q5001 Valve Linkage 

do not require the 220738A Adapter Bracket (see Fig. 4).

For detailed instructions on specific linkage assemblies, refer 

to the instruction sheet packed with the linkage. In general, 

check the following points when installing a motor and linkage:

• Adjust valve and louver-type damper linkages so the damper 

or valve moves through only the maximum required distance 

while the motor moves through its full stroke.

• With modulating control, maximum damper opening should 

be no more than 60 degrees. Little additional airflow is 

provided beyond this point.

• Do not exceed load and torque ratings in any application.

Junction Box

When used with liquid-tight conduit connectors, the junction 

box provides NEMA 3 weather protection for the motor. The 

junction box, standard with replacement motors, encloses the 

terminals and provides knockouts for wiring conduits. Housing 

an internal transformer or internal auxiliary switches requires 

using a junction box.

Óïèççç

ÛÏË×ÐÓÛÒÌ
ÞßÍÛ

ßÜßÐÌÛÎ
ÞÎßÝÕÛÌ

ÍÌßÒÜßÎÜ
ÞÑÔÌÍ øì÷

ÓÑÌÑÎ

ÞÑÔÌÍ 
ÐÎÑÊ×ÜÛÜ øì÷

É×Î×ÒÙ 
ÞÑÈ

ÒÑÒóÍÐÎ×ÒÙ ÎÛÌËÎÒ

ÍÐÎ×ÒÙ ÎÛÌËÎÒ

ï   ýïî ÑÎ ïñìþ Æ×ÒÝ ÐÔßÌÛÜ
     ÓßÝØ×ÒÛ ÍÝÎÛÉÍ ÑÎ ÞÑÔÌÍ

ï

211

Summary of Contents for DP











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands