Sounder by Deltronic Labs. Rev. 1.01
7
Selecting .WAV files
Enter the complete path and file name for each wave file. To select a file by browsing,
click on the entry blank for that file and then click on the Browse button at the bottom.
Any blank entries with be replaced with a very short silent sound when you download.
Downloading
Sounder stores the sounds in flash memory. This memory must be erased before it can be
reprogrammed. Thus in most cases you should click the Erase & Download button to
download sounds. Erasing takes about 30 seconds. The time required for downloading
depends upon the total length of the sounds.
Testing the Download
After the download completes you can check its accuracy by clicking the Test button.
The test retrieves the downloaded information from the Sounder board and compares it
with the information in files.
