FRAME ASSEMBLY
A
B
ASSEMBLE THE SEAT FRAME (
B
) TO THE WEIGHT COLUMN (
A
) USING THE M12 x 70MM
BOLTS (
I
), M12 WASHERS (
K
) AND M12 LOCKNUTS (
M
). THEN INSTALL THE 2” RUBBER
BOOT (
H
).
INSERT THE SEAT AND ARM PAD ASSEMBLY INTO THE SEAT FRAME
(B)
AND ADJUST PULL
-PINS UNTIL THEY LOCK INTO PLACE. INSTALL THE TURN KNOBS
(G)
INTO THE SEAT
FRAME.
ADJUSTING THE SEAT AND ARM PADS:
RAISE AND LOWER THE PADS USING THE PULL
PIN. LOOSEN THE TURN KNOB BEFORE MAKING ANY ADJUSTMENTS. MAKE SURE THE
PULL PIN IS SECURE IN THE ADJUSTMENT HOLE, THEN TIGHTEN THE TURN KNOB BEFORE
USE.
M
K
K
I
H
G
G
