Data Retrieval
Operation
TroubleShooting
Click
DATA
menu, the App will read the data from the
device automatically (Figures 5 and 6). The temperature
charts and data tables will be displayed and saved in
the App.
Start the logger
Press the
button for 5 seconds till both LEDs light up,
the
ACTIVE LED
will then flash every 5 seconds indicating
the logger is working.
Make a mark
Press the
button once, both LEDs will light up for 2
seconds, indicating a mark has been set successfully. A
total of 8 marks can be made.
Stop the logger
Press the
button for 5 seconds till both LEDs light up,
the
ACTIVE LED
will then be lit indicating the logger has
stopped and has been used up. Directly plugging the USB
into a computer will also automatically stop the logger.
Get the report
Either plug the USB into a computer to get an encrypted
PDF report or use the App to get a detailed data report.
Figure 5
Figure 6
Contact Tech Support at:
Phone:
925-249-2250 Ext 5120
Toll Free:
800-390-0804
US & Canada Email:
Scan for app and more information
© 2019 DeltaTrak, Inc.
