Page 8
Port Settings
The parallel port drive will try to allocate the parallel port with FlashLink
automatically with the first run of the FlashLink software under the following
conditions:
Standard port address assignment
a)
One parallel port configuration
LPT1 address: 0x378
b)
More than one parallel port configuration
LPT1 address: 0x3BC
LPT2 address: 0x378
LPT3 address: 0x278
In all non-standard cases the user has to specify explicitly the LPT address of the
parallel port used with the FlashLink. This can be done using the Customize
Screen
Æ
Port Setup. (
See next page for illustration
.)