The HDMI02DPX Camera Manual
6
/
15
Notes
1
To show the
Camera Control Panel
, move your mouse to the left of the video window. See Sec.5.2 for details
2
Move the mouse cursor to the top of the video window, a
Measurement Toolbar
will pop up for calibration and measurement operations.
When user left-clicks the
Float/Fixed
button
on the
Measurement Toolbar,
the
Measurement Toolbar
will be fixed. In this case the
Camera Control Panel
will not pop up automatically even if users move mouse cursor to left side of the video window. Only when user
left-clicks the
button on the
Measurement Toolbar
to exit from measuring procedure will they be able to do other operations on the
Camera Control Panel
, or the
Synthesis Camera Control Toolbar.
During the measuring process, when a specific measuring object is
selected, an
Object Location & Attributes Control Bar
will appear for changing location and
properties of the selected object. See Sec.7.3 for details
3
When users move mouse cursor to the bottom of the video window, the
Synthesis Camera Control Toolbar
will pop up automatically.
. See Sec.5.4 for details.
5.2
The Camera Control Panel on the Left Side of the Video Window
The
Camera Control Panel
controls the camera to achieve the best video or image quality according to the specific
applications; It will pop up automatically when the mouse cursor is moved to the left side of the video window. Left-
clicking
button to achieve
Display/Auto Hide
switch of the
Camera Control Panel
.
Camera Control Panel
Function
Function Description
Snap
Capture
image and save it to the SD card
Record
Record
video and save it to the SD card
Auto Exposure
When
Auto Exposure
is checked, the system will automatically adjust exposure time and
gain according to the value of exposure compensation
Exposure
Compensation
Available when
Auto Exposure
is checked. Slide to left or right to adjust
Exposure
Compensation
according to the current video brightness to achieve proper brightness value
Exposure Time
Available when
Auto Exposure
is not checked. Slide to left or right to reduce or increase
exposure time, adjusting brightness of the video
Gain
Adjust
Gain
to reduce or increase brightness of video. The Noise will be reduced or
increased accordingly
Red
Slide to left or right to decrease or increase the proportion of
Red
in RGB on video
Green
Slide to left or right to decrease or increase the proportion of
Green
in RGB on video
Blue
Slide to left or right to decrease or increase the proportion of
Blue
in RGB on the video
Auto
White
Balance
White Balance
adjustment according to the video continuously
Manual
White
Balance
Adjust the
Red
or
Blue
item to set the video White Balance.
ROI White Balance
White Balance
could be adjusted when the ROI region is changed according to content
inside the ROI region.
Sharpness
Adjust
Sharpness
level of the video
Denoise
Slide left or right to denoise the video
Saturation
Adjust
Saturation
level of the video
Gamma
Adjust
Gamma
level of the video. Slide to the right side to increase gamma and to the left
to decrease gamma.
Contrast
Adjust
Contrast
level of the video. Slide to the right side to increase contrast and to the
left to decrease contrast.
DC
For
DC
illumination, there will be no fluctuation in light source so no need for
compensating light flickering
AC(50HZ)
Check
AC(50HZ)
to eliminate flickering caused by 50Hz light source
AC(60HZ)
Check
AC(60HZ)
to eliminate flickering caused by 60Hz light source
Default
Restore all the settings in the
Camera Control Panel
to default values
