DeltaOHM HD2011NMT, Operating Manual

Page: 21 / 26

HD2011NMT
- 21 -
V1.2
Accessories
HD2011-Li9A 12 V lithium battery for 48 hours autonomy. To be mounted inside
the HD2011NMT station.
HD2011-Li40A 12 V lithium battery for 7 days autonomy. To be mounted inside
the HD2011NMT station.
HD2011-Pb18A 12 V / 18 Ah lead-acid battery. To be mounted inside the
HD2011NMT station. For 24 V
DC
power supply.
HD2011-Pb55A 12 V / 55 Ah lead-acid battery. To be mounted outside the
HD2011NMT station. For power supply from a solar panel.
HD2011-Pb70A 12 V / 70 Ah lead-acid battery. To be mounted outside the
HD2011NMT station. For power supply from a solar panel.
HD2011-Pb100A 12 V / 100 Ah lead-acid battery. To be mounted outside the
HD2011NMT station. For power supply from a solar panel.
HD2011-V55 Waterproof suitcase for transporting and positioning the HD2011-
Pb55A battery (not included).
HD2011-V100 Waterproof suitcase for transporting and positioning the HD2011-
Pb70A or HD2011-Pb100A battery (not included).
HD32MT.SWD 100…240 Vac / 24 Vdc supply box with switch. Suitable for fas-
tening to a rod. Includes fastening accessories.
HD2011-GPS GPS module.
HD2011NMT.9 Threaded bush for fixing HDWME on ∅ 40 mm mast.
HD2005.20.1 Tripod kit in anodized aluminum with adjustable legs for the instal-
lation of environmental sensors. Height 3 m (4 m with optional
HD2003.72.AA extension).
HD2003.72.AA Extension L=1 m for HD2005.20.1 tripod.
VTRAP4M Aluminum stand, extensible and transportable. Maximum height
3.7 m for positioning the microphone at 4 m height. Height when
closed 1.07 m. Minimum height 1.24 m. Threaded connection for
HDWME. Equipped with cushioning. When used extended in
conjunction with HDWME, the bracing with HD2003.75K
or
HD2003.78K (not included) is recommended.
PFV.120W 120W photovoltaic panel.
HD2004.22K Kit for fastening the photovoltaic panel.
HD2003.75K Kit for bracing the mast, to fix on the ground with pegs, 2 m fix-
ing diameter.
HD2003.78K Kit for bracing the mast, to fasten on the floor with screws, 2 m
fixing diameter.
HD2003.74 Clamping with bubble level for ∅ 40 mm mast with 3 tie rods for
bracing.
Delta OHM LAT N° 124 metrology laboratories are ISO/IEC 17025 accredited by AC-
CREDIA in Temperature, Humidity, Pressure, Photometry/Radiometry, Acoustics and
Air Speed. They can provide certificates for the accredited quantities.