Wireless LCD NVR Combo User manual
3
4
System diagram
①
Plug in the included USB mouse to this connector.
②
Connect the output of the supplied 12V power adapter into the power socket on the NVR.
③
Plug the power adapter into the wall socket.
④
Connect the output of the supplied 12V power adapter into the power socket on the Camera.
⑤
Plug the power adapter into the wall socket.
Wait for a few minutes till the NVR and the IP cameras finished startup. So far, the local surveillance
system was done.
⑥
If you want to remote access this system with a smart phone or computer, you should connect the NVR
to your home wireless router with a RJ45 network cable and make sure the router has been linked to
internet.
5
Antenna installation
Use a clockwise motion to connect the antenna.
Make sure the antenna is connected firmly but not excessively.
You can adjust antenna horizontal or vertical direction to get
best reception.
Summary of Contents for Wireless LCD NVR COMBO
Page 1: ...Wireless LCD NVR COMBO...