1
EN – User guide
You have bought a wall mount for a flat panel display up to 75kg. For
mounting on concrete and wooden walls, please use the included screws
and plugs. For mounting on other type of walls, please use intended screws
and plug´s (not included).
Please follow the step by step guide on how to mount your flat panel display
together with the wall mount on the wall.
Mounting
Measure and mark four holes in the upper part of the wall plate and two holes
in the lower part.
Use appropriate tools and fix the wall plate to the wall.
Choose the appropriate screws, washers and spacers (if needed) that fits your
flat panel display´s wall mounting holes. Fix the two mounting brackets to your
flat panel display. Note that the mounting brackets need to have the safety
hooks outwards. Release the safety hooks’ screws if needed and move the
hooks to their lower position.
Mount the flat panel display with the attached brackets to
the wall mount’s front plate.
Move the safety hooks to their upper position and tighten
the screws.
Adjust the tilt to desired angle by turning the top knobs.
Done.
Support
If you experience any problem installing or using this product, don’t hesitate to
contact us. We appreciate it if you have the information regarding your
computer environment at hand; Operating system version and the item
number of your Deltaco product.
Contact us by email: [email protected].
More product and support information can be found at www.deltaco.eu.
2
3
4
1
Summary of Contents for ARM-413
Page 8: ......
