4
You can reset the custom modes by pressing down and holding FN + DEL for 3 sec, the keyboard
will respond by blinking once and going into preset LED mode.
Software
RGB with 16 million colors is only available via the software. The software is optional.
Download the software from Deltaco.se on the product page and proceed with the installation.
Compatibility:
The software is compatible with Windows 10.
With the software you get 3 profiles. In each profile you can have up to 5 custom modes.
The amount of LED modes are also extended from 10 to 14 via the software.
Some of the extended LED modes also has settings like: Intensity and speed.
Note: On some LED modes you can only change either intensity or speed level.
1. Here you can choose which profile to use / edit.
2. The macro editor.
3. “Light” = Enabling this opens the LED menu.
4. “Restore” = Restores the settings to default.
5. The overview of the keyboard, set keys will be marked with a line border.
6. Buttons for minimizing and closing the program.
7. “OK” = Applies the settings and closes the program.
“Cancel” = Cancels any made settings and closes the program.
“Apply” = Applies the settings and leaves the program running.
ENG - Instruction manual
