1
Determine which handlebar shim is best
suited for your needs, insert into handlebar
stem support (FIGURE 1).
Once attached clip on to handlebar.
1
Use Allen key (2.5mm) to remove mount screw.
2
Slide hinge mount arm over stem support
(FIGURE 1). Clamp to close, once in position,
tighten clamp screw with Allen key
(4mm).
Service:
Please do not return to store;
for immediate response email
GARMIN
®
OR WAHOO
®
MOUNTING OPTIONS
FIGURE 1
FIGURE 1
IMPORTANT NOTE
Be sure stem support is positioned
underneath stem.
IMPORTANT NOTE
Do not attach clamp to any tapered
section of your handlebar.
2
Choose Garmin
®
or Wahoo
®
mount, position on to
arm. Tighten mount screw with Allen key (2.5mm).
GARMIN
®
WAHOO
®
Delta Cycle Corporation
36 York Avenue, Randolph, MA 02368 USA
800-474-6615 / www.designbydelta.com
