08V0
STEP 4
INSERTING CHILD TRAY
STEP 5
BACK SEAT RECLINING
STEP 6
ATTACHING CAR SEAT
Flip the child tray upside down and
align the snap and lock button to the
side of the tray tube as shown on fig. 1.
Insert the tray onto the tray support
tube until you hear a click.
Once the child tray is securely inserted
and fastened onto the tray tube, rotate the
child tray into a locked position (shown in
fig.2). To open, press the button lock and
rotate tray upward.
Press button on cord housing and pull away to recline
seat, as shown in fig. 1.
To return to an upright position, hold cord loop while
moving cord housing towards the backseat.
Final step to secure car seat onto
the stroller, turn and lock red
latches (fig.2). Check that car seat
is securely attached by pulling up
on the car seat handle. To remove,
undo latches and unlock car seat
from childtray.
To use the car seat feature, first lock back wheels
and recline the back seat to its lowest point and fold
canopy. Align car seat as shown in fig.1. Lower the
car seat feet first, then lower head part until it is
hooked onto the child tray and clicks.
fig. 1
fig. 1
fig. 1
fig. 2
(car seat attached and locked
to child tray)
car seat
front locks
fig. 2
To use the car seat feature, lock back
wheels and recline the back seat to its
lowest point and fold canopy closed. Align
car seat as shown in fig.1. Angle feet first,
while lowering car seat
into a locked position
on the child tray.
