Delta RTU-CN01, Operation Manual

Page: 62 / 89

Chapter 7 Application Examples
7-9
7_
7.1.2 Downloading Configuration to CANopen Master
1. Click on “127Master” symbol on the CANopen configuration interface and then click on “Node List”
tab. On the “Node List” tab page, you see the available node RTU-CN01 is on the left and “Node
Configuration List” is on the right in “Available Node List” area.
2. Add the CANopen slave device on the left to the node configuration list on the right of the “Node List”
tab page by selecting the CANopen slave node and then clicking “ ”. The CANopen slave node is
added to the node configuration list of the “Node List” tab by doing so.