Delta RowCool HCH1CB0, User Manual, Page: 45 / 128

4 1
Chapter 5 Operation
y
Intelligent
Display if the intelligent temperature control is enabled. This option only displays the status.
You cannot change the setting. For change of setting, refer to
5.7.4 Setting of automatic
control mode .
y
Leak. Cut-Off
Set if the unit will stop when the water leakage detector detects any leakage so as to pre-
YHQWOHDNDJHH[SDQVLRQ
5.7.4 Setting of automatic control mode
Path: Main Menu
ĺ
Administrator
ĺ
System
ĺ
Intelligent
: Intelligent
OFF
This unit supports two kinds of automatic control modes:
1. Intelligent control (default)
The system will automatically adjust the fans and the actuator in accordance with the set
supply air temperature and humidity.
2. PID control
The system will make adjustment by PID parameters.
When the unit enters the automatic mode, the default setting is intelligent control. If the intel-
ligent control mode is off, the system will automatically adopt the PID control. To turn on or off
the intelligent control, you need to key in the admin password .