04 Wiring | REG2000
4-8
4-2 Main Circuit Terminals
Remove the top cover before wiring the main circuit terminals.
The unit shown in the figures are for reference only and your drive may look different.
Removing the outer cover for wiring
1) Screw torque: 14–16 kg-cm [12.15–13.88 lb-in.] (1.37–1.57 Nm)
Loosen the screws for the wiring top cover as shown in the diagrams below.
Frame A, B Frame C
2) After loosening the screws, remove the wiring top cover as shown in the diagrams below.
Frame A, B Frame C
