Thank you for selecting this Delta product! We design and manufacture each Delta item so you can enjoy years of trouble-free use. This
Pedestal Toilet Paper Holder has a pivoting arm for easy roll replacement. The height adjusts from 17” to 25” making it ideal for small
spaces. We made it adjustable by designing a tool-free and patented twist & lock mechanism that is easy to use.
DSHB318-XXX 10 08 2014
Assembly is easy, simply
follow these instructions.
To adjust the height of the Pedestal Toilet Paper Holder :
1. Grasp the outer/lower tubing with one hand and then the
inner/upper tubing with the other hand.
2. Twist the inner/upper tubing counter-clockwise a quarter turn, to
allow the tube to move up and down.
3. Lift the inner/upper tubing to the desired height.
4. Twist the inner/upper tubing clockwise until hand tight.
Lastly, raise the pivot arm to the vertical position, place a roll on the
arm and lower the arm into the fixed lower position.
4
Warning: This pedestal toilet paper holder has a weight in the base that will keep the product stable and upright. The product is not intended to support a weight load, force,
or leverage.
Parts List:
Base sub-assembly
Tubing sub-assembly
Pivot arm sub-assembly
Place the outer/lower end of the tubing sub-assembly onto the bolt at
the top of the base. Hold the outer/lower tube and turn clockwise to
fasten the tubing onto the base. Hand tighten only.
Insert bolt on pivot arm sub-assembly into top of tubing. Hold
the inner/upper tube and turn the pivot arm sub-assembly
clockwise to fasten. Hand tighten only.
1
Inner/Upper tube
Outer/Lower tube
2
PEDESTAL PIVOTING TOILET PAPER HOLDER
3
(2)
(3)
(4)
