Delta M815-MX Series Manual Download Page 26 | Manualshive

Page: 26 / 64

background image

M815-MX Series User’s Manual

26

disk drives. The floppy ribbon cable connector for two 3.5” wide disk drives.
Follow the procedure below to install the FDD drives.

Install the floppy disk drive into a suitable drive bay in your system case.

Locate the floppy disk drive connector on the motherboard. The connector is
named FDC1. Plug one end of the floppy ribbon cable into FDC1. Plug one of the
other connectors into the data connector on the rear edge of the floppy disk drive.

When you start up your assembled system, the floppy disk drive

will be identified as drive A. If you have installed two drives on the

cable, they will be identified as drives A and B.

Connecting the Power Supply

Most cases include a power supply unit, it requires an ATX power supply for system
application.
Follow the procedure below to connect the power supply.

Locate the power connector ATX1 on the motherboard and devices

Plug the main power supply cable from the power supply unit into the ATX1
connector on the motherboard.

Plug a free power supply cable from the power supply unit into the power connector
on the rear edge of the floppy disk drive(s).

Plug a free power supply cable from the power supply unit into the power connector
on the rear edge of the IDE device(s).

«
...
24
25
26
27
28
...
»

Summary of Contents for M815-MX Series

































































Reviews:

No comments

Related manuals for M815-MX Series

R0K5R8C34DK2HBR

Brand: Renesas Pages: 32

Brand: AMPTRON Pages: 41

Brand: JETWAY Pages: 48

Brand: Zetex Pages: 8

Brand: IEI Technology Pages: 131

Brand: Aaeon Pages: 120

Brand: Biostar Pages: 51

Brand: Icop Pages: 40

Brand: Nuvoton Pages: 14

Brand: ON Semiconductor Pages: 19

Brand: IBASE Technology Pages: 64

B85M-P32 series

Brand: MSI Pages: 186

Brand: ISSC Pages: 39

Brand: IEI Technology Pages: 156

Brand: OLIMEX Pages: 26

Brand: DFI Pages: 96

Brand: Honda Pages: 132

Brand: Vox Pages: 93

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands