6. Hardware Installation
M81-X Series User’s Manual
23
the Processor until it is freed from Slot1. Lift the entire Processor until it is
freed from the URM.
Locate the power connector J1 for the Processor cooling fan, then connect the
cable from cooling fan to J1.
Warning : Processors require a heat sink with a cooling fan. Failure to provide adequate
cooling of the Processor may seriously affect system performance or cause permanent
damage to the Processor.
Step2: Use the screws and mounting brackets supplied with you chassis to install the
motherboard. Whenever possible, refer to the manufacturer’s instructions.
Step3: Install the DIMM Modules
Locate the DIMM socket on the motherboard, then open the locking levers on
the DIMM socket.
Align the DIMM to the socket, then install the DIMM module into the socket and
press it carefully but firmly down 90 degrees on to the socket until the arms lock.
LOCK
SLIDER
OPEN
