DANGER : ELECTRICAL HAZARD!!
- To avoid shock hazard during cabling, insure any live grid connections are
removed from the inverter.
- Installation for AC terminal must meet the local electrical code.
- Failed to follow the instructions may damage AC cable.
CAUTION : INVERTER AND EQUIPMENT DAMAGE MAY OCCUR !
WARNING !
- Code compliance is the installer's responsibility.
- Inverter warranty void if the DC input voltage exceeds 1100 Vdc.
3.4 Electrical Installation for AC Wiring
- In order not to damage the components in the inverter, ensure the correct
conductor is connected to the appropriate AC terminal on the inverter.
CAUTION: WRONG AC WIRING !
In order to ensure the normal long-term operation of the inverter, please follow
the procedures in
Section 5.1
to open and close the door.
If the installation space is too narrow for the wiring operation, please remove the
door according to
Figure 3-12
. After the wiring operation, please install the door
onto the inverter and follow the procedures in
Section 5.1.2
to close the door.
3.3 Door
Figure 3-12: Remove the door
28
Installation
Summary of Contents for M50A 260
