Delta M30A_121, Operation And Installation Manual

Page: 33 / 232

Assemble the AC plug and wires as the procedures shown in Figure 4-14
(RPI M30A). The sequence of L1~ L3 can be connected randomly. However,
N and PE must be connected correctly.
**The connector is not designed for solid wire but only for stranded wires with end steeves.
**That terminal gets a silver surface treatment.
Figure 4-15 : The rubber rings of AC plug
Figure 4-14 : AC plug illustration for M30A
P
Part F
Cable range D2 Cable range D3 Cable range D1
165.3 - 168.5 (REF)
ĭ“
Part F fastening torque (Nm)
D1
D2
20.5 ~ 32.6 13 ~ 20
D3 15.3 ~ 20.5
Fastening distance P (mm) Cable range (mm)
32.6 ~ 41.3 13 ~ 20 1 ~ 7
0 ~ 7
13 ~ 20 1 ~ 5.5
A
B
D1 D2 D3
1. The packing has the parts of AC Plug, please
follow the step to assemble the ac plug first.
The fastening torque range is 55kgf-cm~75kgf-cm.
2. Rotate the plug to release part A & B.
3. Users should select the appropriate diameter rubber gasket for part A to ensure good water
resistance. Cable range (mm) / Part F fastening torque (Nm) / Fastening distance P (mm)
33
Wiring