Delta M15A 220, Operation And Installation Manual

Page: 24 / 126

Follow the steps below to strip the wires before assembling the AC plug:
• Strip the outer jacket from the cable for 70mm.
• Strip 22 ± 2mm of insulation from all wires ends.
Figure 3-8 : Strip the wires
70 mm (MAX)
22±2 mm
PE
N
L1
L2
L3
Outer Jacket
- Make sure to choose proper size for AC cable.
- Failed to follow these instructions may cause AC plug damage.
- If there is any conflict between installation instruction and electrical code,
please follow the electrical code.
CAUTION
！
Machine and equipment damage may occur.
3.3.3 AC Wiring Preparation
Size of each wire Cable diameter Recommended Torque
8~14 mm² (8~6 AWG) 20~26 mm
1.8~2.5 N
•
m
The AC wires must be jacketed and meet the specifications in Table 3-2 .
If there is any conflict with local electrical code, please follow the electrical code.
Table 3-2: AC wires requirement
24
Installation