Delta HPH-100K, User Manual, Page: 65 / 80

6 1
Chapter 8 LCD Display and Settings
Chapter 8 : LCD Display and Settings
8.1 LCD Display Hierarchy
MAIN MENU
MAIN SCREEN
(Level 1) (Level 1) (Level 1)
(Level 2)
(Level 3)
PARALLEL SCREEN
ALARM/ FAULT
INFORMATION
(Level 3)
MAINS
MEASURE
(Level 4)
(Level 5)
(Level 5)
(Level 5)
VPHASE(V)/ VLINE(V)/ FREQ(Hz)
OUTPUT
BATTERY
(Level 5)
LOAD(%)/ KW/ KVA/ CURRENT(A)
VPHASE(V)/ VLINE(V)/ FREQ(Hz)
CAPACITY(%)/ REMAIN TIME (MIN)
VOLTAGE(V)/ CURRENT(A)/
INVERTER
VPHASE(V)/ VLINE(V)/ FREQ(Hz)
BYPASS
VPHASE(V)/ VLINE(V)/ FREQ(Hz)
TEMPERATURE
(Level 5)
(Level 5)
AMB/ PFC/ INVERTER
DC BUS
(Level 5)
BUS(+)/ BUS(-)
MAINTENANCE
(Level 4)
SERIAL NUMBER
MODEL NAME
EVENT LOG
FIRMWARE VERSION
STATISTICS
(Level 5)
(Level 5)
(Level 5)
(Level 5)
(Level 5)
PFC/ INV & SYSTEM
ON BYPASS COUNTS/
RUN TIME/ ON BAT COUNTS/
TOTAL OF EVENT LOG
EVENT CODE/ EVENT LOG
REAR TIME CLOCK
(Level 5)
DATE(Y-M-D)/ TIME(H-M-S)
CONTROL & TEST
(Level 5)
BATT TEST/ BEEP ENABLE/
COMMON BATT / SMB
LANGUAGE SETUP
(Level 5)
LANGUAGE
*
(Figure 8-1: LCD Display Hierarchy)
NOTE:
1. Please refer to
3.2 Control Panel
for information about the LCD and function keys.
2. All information shown in the LCD diagrams presented in Chapter 8 : LCD Display and
Settings
are for reference only. Actual readings depend on the operation of the UPS.
3. * Means that only service personnel can enable this function.