4
Bassinet Assembly
Note:
You may need the help of another adult to help steady all parts for
assembly.
• Place the frame on a flat surface with the support legs facing up.
• Locate the four (x4) support tubes.
• Slide a support tube into the plastic glider support. Push the support
bar through the second plastic slider support.
• Repeat with the second support tube.
• Locate the four G6 screws and the base legs.
•
With the open end up, line the bottom holes up with the two sup-
port tubes and plastic glider supports.
• Insert the G6 screw and hand tighten.
•
Align the other bottom hole on the base leg with the other support
tube and plastic glider support.
• Insert the other G6 screw and hand tighten.
• Using the screw driver provided, tighten the two screws.
•Repeat for other support tube.
• Rotate the support legs out as shown in the above images.
1
3
4
2
Support Legs
Plastic Slider
Support
Plastic Slider
Support
Support Tube
Customer Service
Tel. (800) 377-3777
www.DeltaChildrensProducts.com
G6
