MODEL
FRS200/VDB200F6D1
Page 3.
DUCT CONNECTION
1.
Remove the tape stuck on damper before duct
connection and make sure the damp is closed by
gravity.
2.
Attach the 6’’ duct (not provided) onto the duct
connector and tape all ductwork connections to
make them secure and airtight. (Fig. O)
3.
Install the duct with a gradient 1°~2° to the
outside.
Ceiling
Body
Tape
Duct
Outside
Gradient
1°~2°
Inside
Duct connector
Fig. O
CONNECT WIRING
1.
Follow all local electrical code and ANSI/NFPA70.
2.
NEVER place a switch where it can be reached
from a tub or shower.
3.
Connect wires as shown in wiring diagrams.
OFF
ON
L
N
POWER SWITCH
JUNCTION BOX
SWITCH BOX
WHITE
BLACK
GREEN
GRD
Fig. P
BLACK
ON/OFF SWITCH
(purchase separately)
SWITCH BOX
120 VAC
LINE IN
WHITE
GROUND
(bare)
POWER
SWITCH
WIRING
PLATE
Fig. Q
4.
Using wire nuts (not provided), connect the
house power cable to the ventilating fan wires.
5.
14 AWG (2.1 mm
2
) is the smallest conductor that
shall be used for branch-circuit wiring.
OPERATION
1.
Turn the POWER switch on to operate.
MAINTENANCE
WARNING
Disconnect the power source before working on the
unit. Routine maintenance must be done every year.
CAUTION:
1.
Never use gasoline, benzene, thinner or any other
such chemicals to clean the supply air fan.
2.
Do not allow water to enter the motor.
3.
Do not soak resin parts in water over 140°F
(60°C).
CLEANING
1.
Open the filter maintenance cover by turning the
hand screw counterclockwise. (Fig. R)
Fig. R
2.
Pull out the pre-filter, clean it with water once in
3 months. (Fig. S)
Fig. S
3.
Pull out the MERV filter (optional), clean it with
vacuum cleaner once in 3 months, and replace it
once in 6 months. (Fig. T)
Fig. T
4.
Reinstall the filters and close the maintenance
cover by turning the screw clockwise.
DIMENSIONS
Fig. U
WARRANTY
DELTA ELECTRONICS THREE YEAR LIMITED WARRANTY
Delta Electronics Inc. (‘‘Delta Electronics’’) warrants to the
original consumer purchaser in the USA
and Canada
that the
Breez ventilation fan products will be free from defects in
material or workmanship. This warranty is limited to three (3)
years from the original date of purchase.
Limitations and Exclusions
Limitations and Exclusions
Limitations and Exclusions
Limitations and Exclusions
1. During the warranty period, a replacement for any defective
product will be supplied free of charge for installation by
the consumer. The warranty provided herein does not cover
charges for labor or other costs incurred in the
troubleshooting, repair, removal, and installation service.
2. All returns of defective parts or products must include the
product model number, and must be made through an
authorized Delta Electronics distributor. Authorized returns
must be shipped prepaid. Repaired or replacement
products will be shipped by Delta Electronics F.O.B.
shipping point.
3. Delta Electronics shall not be liable for any indirect,
incidental, consequential, punitive, or special damages
arising out of or in connection with products use or
performance, regardless of the form of action whether in
contract, tort (including negligence), strict product liability
or otherwise.
4. This warranty does not extend to fluorescent lamp starters
and tubes.
5. The warranty does not cover if user does not comply with
manufacturer’s installation manual.
6. To qualify for warranty service, you must notify Delta
Electronics at the address or telephone number below.
7. Delta Electronics shall have no liability to the original
owner-user with respect to any defect caused by abuse,
misuse, neglect, improper transportation or storage,
improper
testing,
improper
installation,
improper
operation, improper use, improper maintenance, improper
repair,
improper
alteration,
improper
modification,
tampering or accident of products or parts thereof, or
unusual deterioration or degradation of products or parts
thereof due to a physical environment beyond the
requirements of products’ specifications.
Address: 46101 Fremont Boulevard, Fremont , CA 94538 US
Toll Free Number: 1-888-979-9889
