Delta DVP-SA2, Instruction Sheet

Page: 3 / 20

- 2 -
Model
Item
DVP12SA211R DVP12SA211T
Connector European standard removable terminal block (Pin pitch: 3.5mm)
Operation Maximum power loss time is 10ms or less.
Inrush current Max. 7.5 A@24 VDC, I
2
t = 0.25 A
2
S
Fuse capacity 2.5 A/30 VDC, Polyswitch
Power consumption 1.8 W 1.5 W
Power protection With counter-connection protection on the polarity of DC input power
Insulation resistance > 5 M Ω (all I/O point-to-ground: 500 VDC)
Noise immunity
ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV,
Analog & Communication I/O: 1kV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
Grounding
The diameter of grounding wire cannot be smaller than the wire
diameter of terminals L and N (All DVP units should be grounded
directly to the ground pole).
Operation / storage
Operation: 0 to 55°C (temp.), 50 to 95% (humidity), Pollution degree 2
Storage: -25 to 70°C (temp.), 5 to 95% (humidity)
Vibration / shock
resistance International standards: IEC61131-2, IEC 68-2-6 (TEST
Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea)
Weight (g) 140g 131g
Input Points
Spec.
Items
24 VDC (-15 to 20%) single common port input
Input No. X0 to X2 X3 to X7
Input type DC (SINK or SOURCE)
Input current (±10%) 24 VDC, 5 mA
Input impedance 4.7 k Ω
Max. frequency 100 kHz 10 kHz
Off  On > 15 VDC
Action
level
On  Off < 5 VDC
Off  On < 2.5 μ s < 20 μ s
Response
time
On  Off < 5 μ s < 50 μ s
Filter time Adjustable within 0 ~ 20ms by D1020 (Default: 10ms)
Output Points Spec.
Items
Relay Transistor
Output No. Y0 to Y3 Y0, Y2 Y1, Y3
Max. frequency 1 Hz 100 kHz 10 kHz
Working voltage 250 VAC, < 30 VDC 5 to 30 VDC
#1
Resistive 1.5 A/1 point (5 A/COM) 0.5 A/1 point (2 A/COM)
Inductive
#2
15 W (30 VDC)
Max. load
Lamp 20 WDC/100 WAC 2.5 W (30 VDC)
Off

On 2 μ s
#3
20 μ s
#3
Response
time
On  Off
Approx. 10 ms
3 μ s
#3
30 μ s
#3
#1: UP, ZP must work with external auxiliary power supply 24 VDC (-15 to +20%), rated
consumption approx. 1mA/point.