Delta DVP-ES2, Operation Manual

Page: 6 / 20

i
DVP-ES2/EX2/SS2/SA2/SX2/SE&TP
Operation Manual
Programming
Contents
1 PLC Con cepts
1.1 PLC Scan Method……………………………………………………………………………... 1-2
1.2 Current Flow……………………………………………………………………………………. 1-3
1.3 NO Contact, NC Contact……………………………………………………………………… 1-3
1.4 PLC Registers and Relays……………………………………………………………………. 1-3
1.5 Ladder Logic Symbols………………………………………………………………………… 1-3
1.5.1 Creating a PLC Ladder Program…………………………………………………... 1-5
1.5.2 LD / LDI (Load NO contact / Load NC contact)…………………………………... 1-6
1.5.3 LDP / LDF (Load Rising edge trigger/ Load Falling edge trigger)……………… 1-6
1.5.4 AND / ANI (Connect NO contact in series / Connect NC contact in series)…... 1-6
1.5.5 ANDP / ANDF (Connect Rising edge in series/ Connect Falling edge in
series)………………………………………………………………………………….
1-6
1.5.6 OR / ORI (Connect NO contact in parallel / Connect NC contact in parallel)…. 1-6
1.5.7 ORP / ORF (Connect Rising edge in parallel/ Connect Falling edge in
parallel)………………………………………………………………………………..
1-6
1.5.8 ANB (Connect block in series)……………………………………………………... 1-6
1.5.9 ORB (Connect block in parallel)……………………………………………………. 1-7
1.5.10 MPS / MRD / MPP (Branch instructions)………………………………………….. 1-7
1.5.11 STL (Step Ladder Programming)…………………………………………………... 1-7
1.5.12 RET (Return)…………………………………………………………………………. 1-8
1.6 Conversion between Ladder Diagram and Instruction List Mode………………………… 1-9
1.7 Fuzzy Syntax…………………………………………………………………………………… 1-10
1.8 Correcting Ladder Diagram…………………………………………………………………… 1-11
1.9 Basic Program Design Examples……………………………………………………………. 1-13
2 Pr ogr amming Concepts
2.1 ES2/EX2 Memory Map……………………………………………………………………….. 2-2
2.2 SS2 Memory Map…………………………………………………………………………….. 2-4
2.3 SA2/SX2 Memory Map……………………………………………………………………….. 2-6
2.4 SE Memory Map…..………………………………………………………………………….. 2-9
2.5 Status and Allocation of Latched Memory………………………………………………….. 2-11
2.6 PLC Bits, Nibbles, Bytes, Words, etc……………………………………………………….. 2-12
2.7 Binary, Octal, Decimal, BCD, Hex…………………………………………………………… 2-12
2.8 M Relay………………………………………………………………………………………… 2-13
2.9 S Relay………………………………………………………………………………………… 2-22
2.10 T (Timer) ……………………………………………………………………………………… 2-22
2.11 C (Counter) …………………………………………………………………………………… 2-23
2.12 High-speed Counters………………………………………………………………………… 2-25
2.13 Special Data Register………………………………………………………………………… 2-29
2.14 E, F Index Registers…………………………………………………………………..……… 2-38
2.15 Nest Level Pointer[N], Pointer[P], Interrupt Pointer [I] …………………..……………….. 2-39
2.16 Applications of Special M Relays and D Registers……………………...………………… 2-41
3 Inst ru ction Set
3.1 Basic Instructions (without API numbers) ………………………..………………………… 3-2