Delta DVP-ES2 Operation Manual Download Page 1

www.deltaww.com

DVP-ES2/EX2/SS2/

        SA2/SX2/SE&TP

Operation Manual - Programming

2014-08-29

Industrial Automation Headquarters

Delta Electronics, Inc. 

Taoyuan Technology Center
No.18, Xinglong Rd., Taoyuan City, 
Taoyuan County 33068, Taiwan
TEL: 886-3-362-6301 / FAX: 886-3-371-6301

Asia

Delta Electronics (Jiangsu) Ltd.

Wujiang Plant 3
1688 Jiangxing East Road, 
Wujiang Economic Development Zone
Wujiang City, Jiang Su Province, P.R.C. 215200
TEL: 86-512-6340-3008 / FAX: 86-769-6340-7290

Delta Greentech (China) Co., Ltd.

238 Min-Xia Road, Pudong District, 
ShangHai, P.R.C. 201209
TEL: 86-21-58635678 / FAX: 86-21-58630003
 

Delta Electronics (Japan), Inc.

Tokyo Office 

2-1-14 Minato-ku Shibadaimon, 
Tokyo 105-0012, Japan
TEL: 81-3-5733-1111 / FAX: 81-3-5733-1211

Delta Electronics (Korea), Inc.

1511, Byucksan Digital Valley 6-cha, Gasan-dong, 
Geumcheon-gu, Seoul, Korea, 153-704
TEL: 82-2-515-5303 / FAX: 82-2-515-5302

Delta Electronics Int’l (S) Pte Ltd.

4 Kaki Bukit Ave 1, #05-05, Singapore 417939
TEL: 65-6747-5155 / FAX: 65-6744-9228

Delta Electronics (India) Pvt. Ltd.

Plot No 43 Sector 35, HSIIDC 
Gurgaon, PIN 122001, Haryana, India 
TEL : 91-124-4874900 / FAX : 91-124-4874945

Americas

Delta Products Corporation (USA)

Raleigh Office

P.O. Box 12173,5101 Davis Drive, 
Research Triangle Park, NC 27709, U.S.A.
TEL: 1-919-767-3800 / FAX: 1-919-767-8080

Delta Greentech (Brasil) S.A.

Sao Paulo Office

Rua Itapeva, 26 - 3° andar Edificio Itapeva One-Bela Vista

01332-000-São Paulo-SP-Brazil
TEL: 55 11 3568-3855 / FAX: 55 11 3568-3865

Europe

Deltronics (The Netherlands) B.V.

Eindhoven Office

De Witbogt 20, 5652 AG Eindhoven, The Netherlands
TEL : +31-40-2592850 / FAX : +31-40-2592851
VOIP : 170

DVP-0139720-08

*We reserve the right to change the information in this manual without prior notice.

D

VP-ES2/EX2/SS2/SA2/SX2/SE&TP  

Operation Manual - Programming

Summary of Contents for DVP-ES2





















Reviews: