background image

4- ENG

D25130

RISK TO BREATHING

• Some cleaning fluids contain substances

which could cause injury to skin, eyes, or
lungs.

HAZARD

HOW TO PREVENT IT

WHAT CAN HAPPEN

• Operate pressure washer in a well venti-

lated area. Avoid enclosed areas such
as garages, basements ,etc.

• Never operate unit in a location occu-

pied by humans or animals.

• Use only cleaning fluids specifically rec-

ommended for high pressure washers.
Follow manufacturers recommenda-
tions.Do not use chlorine bleach or any
other corrosive compound

• Breathing exhaust fumes will cause seri-

ous injury or death.

• Use of acids, toxic or corrosive chemi-

cals, poisons, insecticides, or any kind of
flammable solvent with this product
could result in serious injury or death.

• Improperly stored fuel could lead to ac-

cidental ignition.  Fuel improperly
secured could get into the hands of chil-
dren or other unqualified persons.

•  Do not spray flammable liquids

• Store fuel in an OSHA approved con-

tainer, in a secure location away from
work area.

HAZARD

RISK OF EXPLOSION OR FIRE 
(continued)

HOW TO PREVENT IT

WHAT CAN HAPPEN

Summary of Contents for DT2200P























Reviews: