Wiring:
Type
Wire gauge (AWG)
Stripped length
Torque
Solid
24 - 12
7 - 8 mm (0.28 - 0.31 inches)
5 kg-cm (4.3 lb-in)
Stranded
24 - 12
7 - 8 mm (0.28 - 0.31 inches)
5 kg-cm (4.3 lb-in)
Refer to the following diagram for wiring the power connector.
The temperature rating of the cable must be greater than 75°C (167°F).
Reportez-vous au schéma suivant pour le câblage du connecteur d'alimentation. La
température nominale du câble doit être supérieure à 75°C (167°F).
(6) Hardware specifications
Model
DOP-103DQ
Display
Panel type
4.3" TFT LCD (65,535 colors)
Resolution
480 x 272 pixels
Backlight
LED backlight
(half-life at room temperature of 25°C (77°F) > 10,000 hours)
*1
Display range
95.04 x 53.856 mm
Brightness
400 cd/m² (Typ.)
CPU
ARM Cortex-A8 (800 MHz)
Flash ROM
256 Mbytes
RAM
512 Mbytes
Touchscreen
4-wire resistive touchscreen > 10,000,000 operated
*2
Buzzer
Multi-tone frequency (2 - 4 kHz) / 80 dB
Network interface
1-port, 10/100 Mbps, auto-detection (with built-in isolated power circuit
*3
)
USB
1 USB slave Ver 2.0; 1 USB host Ver 2.0
SD
N/A
Serial
communication
port
COM1
RS-232 (supports flow control) / RS-485
*3
COM2
RS-422 / RS-485
*3
COM3
N/A
Auxiliary function key
N/A
Calendar
Built-in
Cooling method
Natural cooling
Approvals
CE / UL (use shielded network cable and magnetic ring with the filter of
300 ohm / 100 MHz)
Panel waterproof level
IP65 / NEMA4 / UL TYPE 4X (for indoor use only)
Operation voltage
*3
DC +24V (-15% to +15%) (use an isolated power supply)
Supplied by Class 2 or SELV circuit (isolated from MAINS by double insulation)
Dielectric strength
500 VAC for 1 minute (between DC24V terminal and FG terminal)
Power consumption
*3
5.8 W (Max.)
*4
Backup battery
3V lithium battery (CR2032) × 1
Backup battery life
About 3 years or more at room temperature of 25°C (77°F)
(subject to operating temperature and condition)
Operating temperature
0°C to 50°C (32°F to 122°F)
Storage temperature
-20°C to +60°C (-4°F to +140°F)
Model
DOP-103DQ
Operating environment
10% to 90% RH [0°C to 40°C (32°F to 104°F)]
10% to 55% RH [41°C to 50°C (105.8°F to 122°F)]
Pollution degree: 2
Vibration resistance
Conforms to IEC61131-2: continuous vibration 5 Hz - 8.3 Hz
with amplitude 3.5 mm; 8.3 Hz - 150 Hz with amplitude 1G
Shock resistance
Conforms to IEC60068-2-27: 11 ms, 15 G Peak,
in X, Y, and Z directions each for 6 times
Dimensions
(W) x (H) x (D) mm
129 x 103 x 37.8
Mounting dimensions
(W) x (H) mm
118.8 x 92.8
Weight
Approx. 280 g
Note:
1. The half-life of the backlight is defined as the maximum luminance being reduced by 50% when the
maximum drive current is supplied to the HMI. The life of LED backlight specified here is estimated at
room temperature of 25°C (77°F) with ambient humidity.
2. The actuation force of the HMI panel is 40 g. For the durability of the panel, the actuation force should
not exceed 1 kg.
3. The withstand voltage of the isolated power circuit is 1500V peak for 1 minute.
4. The HMI power consumption is the power consumed when the HMI is not connecting with other
peripheral devices. To ensure normal operation of the HMI, the recommended capacity of the power
supply is 1.5 to 2 times of the specified power consumption.
5. Isolated power supply is recommended.
6. To download the DOP-100 series programming software DOPSoft and the user manual, go to Delta's
website at https://www.deltaww.com/.
7. The DOP-100 series can be used with other industrial automation equipment. Read this sheet
carefully and install the product according to the instructions to avoid danger.
