2
1
The mount is shipped to you in two
pieces, the baseplate and the
bulkhead. The bulkhead has tabs
that slot in between the tabs on the
baseplate as shown in the photos.
Each side has two holes, which will
be used with the included button cap
screws & nuts to secure the two
pieces together.
There will be a gap left between the
baseplate and the bulkhead, this is
so that you can route the fridge’s
power cord down & underneath the
baseplate.
Main Assembly
2
You can now set the fridge in place
on the mount and insert each of the
tie down tabs through the slots on
the front and back of the fridge
(shorter in the front, longer in the
back).
These tabs provide a place for each
of the latches to grab, but they likely
won’t work perfectly out of the box.
Each latch is threaded so that you
can adjust their lengths. Do this for
each latch so that they hold the
fridge securely, but can still be
actuated without too much difficulty.
Secure any extra cord length under
the rear portion of the fridge mount,
using the included zip ties & the
holes cut into the baseplate.
Set Fridge in Place & Adjust Latches
