I
NSTALLATION
G
UIDE
DFC-304R3-240 Rev 2.1 Installation Guide
Document Edition 1.1
Document Edition 1.1
Product Description
The DFC-304R3-240 Fan Coil Controller is a
line powered, fully programmable (via GCL+)
Native BACnet
Application Controller that
communicates using the BACnet MS/TP
protocol. Direct 240 VAC line voltage terminal
connections are provided for one, two, or three
speed fans (up to 1 HP).
The binary model, with additional 4 triac
outputs, covers a wide range of Fan Coil Unit
applications, including two and four pipe fan
coils. And room temperature can be a
standard 10K sensor or a BACstat II
connected via a secondary LINKnet network
and 24 VAC power out connection.
Important Information
This controller has terminals for connecting 240VAC (Class 1, Line Voltage). The terminals are
safety rated, however this controller may have to be mounted in an enclosure if it is not
mounted inside the FCU. Check local electrical codes.
Package Contents
Product: DFC-304R3-240 (Rev. 2.1)
DFC-304R3-240 Installation Guide
Related Documents
Delta Controls Wiring Guidelines
DSC/DSC Release Notes for related Firmware
Delta Controls General System Description (Delta Products System Architecture Description)
