12
1.
Remove one grinding wheel as instructed in the
section
“CHANGING GRINDING WHEELS.”
2.
Remove the inner wheel flange (A) Fig. 16.
3.
Place the buffing wheel bushing (B) Fig. 17 on the
shaft.
4.
Replace the inner wheel flange (A) Fig. 18 on the
shaft.
5.
Place the buffing wheel (C) Fig. 19 on the shaft.
6.
Place the other wheel flange (D) Fig. 20 on the
shaft.
7.
Thread the arbor nut (E) Fig. 21 on the arbor until
the arbor nut makes contact with the arbor flange.
8.
Push the arbor nut wings out to the closed position,
flat against the arbor flange (Fig. 21).
The arbor nut wings must contact the
arbor flange to prevent vibration.
9.
Replace the wheel cover that was removed in
STEP 2.
10. Adjust the spark guard and tool rest.
INSTALLING BUFFING WHEEL
A
B
A
C
D
E
DISCONNECT MACHINE FROM POWER
SOURCE.
Fig. 16
Fig. 17
Fig. 19
Fig. 18
Fig. 21
Fig. 20
