background image

12

Delta Building Trades and Home Shop Machinery

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory
which in normal use has proven to be defective in workmanship or material, provided that the customer returns the prod-
uct prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within
two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require
that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or
replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse
or repair or alteration made or specifically authorized by anyone other than an authorized Delta Service facility or repre-
sentative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective
products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defec-
tive products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are
expressly disclaimed by Delta.

Printed in U.S.A.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network
of Porter-Cable

 

Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional

information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the loca-
tion of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable   Delta Factory Service Centers,
and Delta Authorized Service Stations. Please visit our Web Site 

www.deltamachinery.com

for a catalog or

for the name of your nearest supplier.

WARNING:

Since accessories, other than those offered by Delta, have not been tested   

with this product, use of such accessories could be hazardous. For safest operation, only 
Delta recommended accessories should be used with this product.

Summary of Contents for 23-840













Reviews: