Delta 23-665 Instruction Manual Download Page 10

10

PARTS, SERVICE OR WARRANTY ASSISTANCE

Delta Building Trades and Home Shop Machinery

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or
machine accessory which in normal use has proven to be defective in workmanship or material, pro-
vided that the customer returns the product prepaid to a Delta factory service center or authorized
service station with proof of purchase of the product within two years and provides Delta with rea-
sonable opportunity to verify the alleged defect by inspection. Delta may require that electric motors
be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or
replacement. Delta will not be responsible for any asserted defect which has resulted from normal
wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an
authorized Delta Service facility or representative. Under no circumstances will Delta be liable for
incidental or consequential damages resulting from defective products. This warranty is Delta’s sole
warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all
other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise,
are expressly disclaimed by Delta.

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-
Cable•Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding
your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet,
please call 1-800-223-7278, (In Canada call 1-800-463-3582).

Summary of Contents for 23-665











Reviews: