7 Install and Start GP1 Software
Install and start the GP1 software DeltaLINK on your PC as
instructed in the GP1 Quick Start Guide and connect to the Weather Station GP1
logger using the GP1-RS232 cable provided.
8 Examine the GP1 Program
1. Select the
Program
window. Factory installed weather stations will have the
WS-GP1 Weather Station Program
pre-installed as shown
2. If
e
s
e, New Program
,
WS-GP1 Weather Station Program
and click
OK
.
C
in
sensor tabs.
4. E
lp
for each tab.
N
and the choice of faster
s
s, and modify them as
r
N
a
eem necessary
For definitions e.g. for the various wind
missing, to reinstall this program Click
Change
on th
elect
Fil
Program
window and
3. lick on and examine the
Air, Wind Sun
and
Ra
xamine the context sensitive online
He
5. ote the default 1 hour Recording Rate in the Main tab
ampling rates for individual sensors in the Sensor tab
equired.
6. ote the various recording options such
s
Average, Maximum, Time of
maximum
and so on, and click the
check boxes as required.
7. Note the choice of units for wind run
and radiation integral.
8. Make any change you d
to the program and click
Apply
to install
it to the logger.
rose options: see the online
Help.
Page
6
© 2007 Delta-T Devices Ltd
